An Automatic Sliding Driveway Gate System is best suited to sites with a level surface area off to the side of the gate opening that is at least as wide as your actual gate, this allows for the full width of the sliding gate to slide back across into the opened position when the remote control is used to operate the gate for vehicles to enter and exit your property. Gravel driveways are not suited to Automatic Sliding Gate Systems as the gravel builds up on the gate track which interrupts the Sliding Gate Operation.Automatic Swing Gate Systems can be installed as a single or pair of gates. Further problems will be damage to the limit settings which can be a costly item to repair, especially as an ongoing maintenance issue.
Commercial sliding gate operators are an option but are not cost effective or as aesthetically pleasing for domestic gates. Automatic swing gates are also ideal for gravel driveways as they do not require any components to be mounted to the driveway surface.To determine which Automatic Gate System will best suit your site you first need to consider the area available both next to the gate opening and inside the gate opening, along with the incline of the driveway and its surrounding area and lastly the driveway surface. Once the gate opening is above 2.8mtrs wide.8mtrs wide we recommend a pair of gates to ensure secure locking of the motors when closed and trouble free operation.
If the site has a steep incline next to and across the gate opening area a commercial motor would be required as a standard domestic motor will not cope with the braking required to ensure the gate opens and closes safely, if the brake on the gate is inadequate for the slope of the site it could cause Rubber Products Manufacturers harm to vehicles or people in the path of the gate when it is operating. Common problems experienced when this happens is that the auto reverse sensor will be activated as the gate thinks it is hitting an object, resulting in the gate sending itself back into the open position. Choosing the right Automatic Gate System depends on a number of factors. Single Swing Gate Systems are best suited for a gate opening up to 2.
Is your site best suited to an Automatic Swing Gate whether it be a single swing gate or a pair of swing gates or is an Automatic Sliding Gate System better suited. Automatic Swing Gates are best suited to sites where the driveway is level on the inside of the property for the gates to swing into the open position.
Automatic sliding gate systems are best suited to paved, concrete or asphalt driveways as these driveways provide a clear surface for the track to be mounted onto.Sliding gate systems are also best suited to sites with a level surface next to the opening for the gate to slide into the open position. Gravel driveways tend to experience a build up of rocks on the sliding gate track